Joyzz Wireless MegaDrive Controller by Krikzz (Black)
- Wireless controllers for SEGA Genesis/Megadrive. Can be used with master system as well
- Low power consumption. Up to 150 hours of gameplay at one charge
- Power saving mode. Battery discharge time in this mode more than year. If there is no any activity for a few minutes controller switches to power saving mode, after pushing on start or d-pad buttons controller immediately will back to active state.
- Quick response, no input lags. Response time around 2.7ms
- Special compatibility mode with genesis 3-buttons and SMS controllers. Some games does not work properly with 6-buttons controllers, but joyzz offer compatibility mode to solve this problem
- 800mAh li-ion battery compatible with Nokia BL-4C series. Such batteries became the standard and they easy to buy and replace in the end of life time
- Charging via micro-usb port
Force power saving mode: Hold MODE+A+X and then click START
Exit from power saving mode: START or any key on D-PAD
3-buttons controller mode: Hold for 3 sec. MODE+START+C. Required for some games which not compatible with 6-buttons controllers. Golden Axe II, for example
SMS controller mode: Hold for 3 sec. MODE+START+B. Required for some SMS games which is not compatible with genesis controllers.
Switch controller to normal 6-buttons mode: MODE+START+Z
Sync controller with receiver: Hold sync button on receiver for 4 sec until led on receiver will start blinking. Hold MODE+X+Y+Z until led went out.
All compatibility modes (combo 3 and 4) will resets to default after power cycle on receiver
Constant led shining: Controller is not connected.
Led turned off: Controller connected
Slow light pulsation: Low battery level
Joyzz configuration tool allow to update firmware and change some default controller settings. Windows application, but can be used on mac or linux with mono runtime.
This little tool is for flashcarts. It show controller system information like signal strength, battery level etc.
- 1x controller
- 1x receiver.
- Charging cable is not included. Any micro-usb cable can be used for charging
We Also Recommend
EverDrive 64 v2.5 (NTSC & PAL compatible with UltraCIC II chip)